![]() ![]() Depending on the USB storage device or its content, long time may be required for loading, the content may not be loaded correctly, or power may not be supplied correctly.Hardware" - "HDMI" and press ENTER, then select "HDMI CEC" and select "Off". If "HDMI CEC" is set to "On", set it to "Off".If the multi-zone function is active, turn it off.Stop an Internet radio, USB storage device, or server content being played.Turn off control devices (PC etc.) connected to the network.Delete any data stored on the USB storage device.Do not connect these devices to the unit. USB hubs and USB devices equipped with the hub function are not supported.USB storage devices equipped with the security function are not supported.– Media inserted into a USB card reader may not be used for this function. The format of USB storage devices supports FAT16 or FAT32 file system format. Prepare a 1 GB or larger USB storage device.Accessing this unit from a PC or smartphone using their applications.Disconnecting and reconnecting cables, USB storage device, speaker setup microphone or headphones, or performing operations on the unit such as turning the power off.While updating the firmware, do not do the following:.In no event will Onkyo be liable to you or any third party for any special, indirect, incidental, or consequential damages of any kind, including, but not limited to, compensation, reimbursement or damages on account of the loss of present or prospective profits, loss of data, or for any other reason whatsoever.īefore updating, please read the following: Onkyo will not be liable and you will have no remedy for damages for any claim of any kind whatsoever concerning your use of the program or the accompanying online documentation, regardless of legal theory, and whether arising in tort or contract. 20 minutes to complete via network or via USB port.ĭisclaimer: The program and accompanying online documentation are furnished to you for use at your own risk. ![]() ![]() Once the message "Completed!" is displayed, the update should be complete. The unit should automatically enter standby mode. To update the firmware, select "Update Now" with the cursor buttons of the remote controller and press ENTER. When this unit is connected to the network, notifications of firmware updates may be displayed automatically. Miscellaneous" - "Firmware Update" - "Version" To confirm the firmware version of your product, press the "settings" button on the remote controller, and refer to "7. If the firmware version of your product differs from the latest one, it is recommended to update the firmware. For how to confirm the latest firmware contents and the firmware version of your product, as well as how to update your Onkyo TX-RZ50 AV Receiver via USB, see the information below.įor the latest firmware contents and the firmware version, visit our company's website. In such a case, new functions may already be available. Depending on the manufacturing timing of the product, the firmware may already be updated. This enables various functions to be added and operations to be improved. This unit is equipped with a function to update the firmware via network or USB port. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |